3D printers – stockholmviews.com

Klipper issue “missing feature STEPPER_STEP_BOTH_EDGE”

Posted on March 29, 2026 by gregganApril 23, 2026

What I did to make it work satis again on my TwooTrees Saphire Pro with MKS Robin Nano V1.2 !
Downgraded klipper with Kiauh 50 stepps to Version v0.13.0-543
built a new flash with this last working verion I could find “there might be others”…

3D print annealing of PLA and HT-PLA

Posted on December 21, 2021 by gregganDecember 29, 2025

Why and how to anneal 3D printed plastic parts and how to build a precision PID controlled 3D-print annealing and filament drying oven PLA is the most common filament materials for 3D printing but like all kinds of polymers PLA also have some plus and…

Prima Select MP120 3D Printer modifications.

Posted on December 5, 2021 by gregganJuly 18, 2022

Prima Select MP120 Modified with belted Z-axis This will be the start of this project I will list the whole plan further down this page. Up to know I’m done with the Z-axis and have installed a MKS Robin min V1.2 controller board and TMC2208…

stockholmviews.com

DIY photography, IOT, Arduino, ESP, Range Rover P38's and much more.

Category Archives: 3D printers

Klipper issue “missing feature STEPPER_STEP_BOTH_EDGE”

3D print annealing of PLA and HT-PLA

Prima Select MP120 3D Printer modifications.