A short video showing my new project in action, a early prototype state. The DIY writeup has started and will continuously being updated during this summer (2015). The machine might not look “Super fast” for some. But keep in mind that the delays are adjustable and the speed can be pushed quite a lot if you don’t use AF. The speed also depends of the camera speed, buffer and memory card speed.
The initial stages of programing the relay sequence controller have been successful and the software have become almost usable :-) Below you can see the parts involved in this project parts that are cheap and easy to find (Ebay) and this is all you need part from the 2nd hand slide projector.
The actual control software is written in Python this is actually my first ever programing attempt so the software might feel a bit old and unpolished. In case anyone with skills in Python 3 coding is reading this and would like to help, just send an e-mail stockholmviews [at] gmail .
Update will also be at Twitter
The USB 4 chanel relay (about 5 USD)
Camera shutter release cord (about 3 USD)
Software free of charge from stockholmviews.com